How Much Does It Cost to Replace a Furnace in a Home?
Most homeowners in the United States pay between $3,800 and $7,500 for a full furnace replacement, including the unit, labor, and haul-away of the old equipment. A straight swap of a standard 80% efficient gas furnace in an accessible basement often lands near the bottom of that range, while a high-efficiency condensing system with new venting and ductwork modifications pushes past $10,000. Furnace replacement is the removal of your existing heating unit and the installation of a new one, sized and vented for your home. Below, we break down 2026 pricing by system type, the line items that move your quote, and how to tell whether a repair still makes sense.
What a Furnace Replacement Actually Costs in 2026
Typical 2026 pricing for a furnace replacement in the United States breaks into a few clear bands. Knowing which band you fall into before a technician arrives keeps the conversation honest.
- Standard 80% gas furnace, straightforward swap: $3,800-$5,500
- High-efficiency 96%+ condensing furnace: $5,500-$9,000
- Oil furnace replacement: $5,000-$9,500, higher if a tank or line needs work
- Electric furnace replacement: $2,500-$5,500
- Mobile home furnace: $2,800-$5,200
The furnace itself is roughly 50-60% of the bill. Labor, permits, a new flue or PVC vent run, a condensate line, a thermostat, and disposal of the old unit make up the rest. On a mid-range job, expect the install crew on site for 4 to 8 hours - a two-person crew for a standard swap, longer if ductwork or gas line work is involved.
If your system is still limping along, a repair visit is often the smarter first call. Our team handles gas furnace repair daily, and we tell homeowners plainly when a $400 fix will buy them another three winters versus when they're throwing money at a unit that's already done.
What Drives the Price Up or Down
Two homes on the same street can get quotes that differ by $3,000. The gap almost always comes down to these factors.
Efficiency rating (AFUE)
AFUE - Annual Fuel Utilization Efficiency - is the percentage of fuel a furnace turns into heat. An 80% furnace sends 20% of its gas up the flue. A 96% condensing furnace recovers most of that. The higher-efficiency unit costs $1,500-$3,000 more upfront, but in cold-climate states it can trim $150-$400 a year off heating bills.
Venting and ductwork
High-efficiency furnaces condense, which means they need PVC venting and a drain line rather than a metal flue. If your home has an old masonry chimney, running new PVC to an exterior wall can add $600-$1,800. Ductwork that's undersized or leaking adds more.
Access and location
A furnace in a clean, wide-open basement is a fast install. A unit crammed into a closet, attic, or crawl space adds labor hours. We routinely see this in older housing stock, and it's one reason quotes vary so much across regions.
Permits and code upgrades
Most jurisdictions require a mechanical permit for a furnace swap, typically $75-$300. If the existing gas line, flue, or electrical disconnect doesn't meet current code, that has to be corrected before the new unit is signed off.
Add-ons
A new smart thermostat runs $150-$400 installed. A whole-home humidifier, media filter cabinet, or UV air purifier adds $300-$1,200 each. None are required, but they're easiest to install while the system is already open.
Furnace Replacement Cost by System Type
Different fuel types carry different price tags because the equipment, venting, and safety requirements aren't the same.
Gas furnaces
Gas is the most common fuel in U.S. homes, and replacement pricing is the most predictable. Standard 80% units sit at $3,800-$5,500 installed; 96%+ condensing units run $5,500-$9,000. If you're weighing a repair, our gas furnace repair work covers everything from igniters and flame sensors to cracked heat exchangers.
Oil furnaces
Oil systems cost more to replace because the burner assembly is more complex and the fuel tank and lines often need inspection or replacement. Expect $5,000-$9,500 for the furnace alone, and add $1,500-$4,000 if the tank is underground or failing. We handle oil furnace repair and full replacements across oil-heating regions in the Northeast and Mid-Atlantic.
Electric furnaces
Electric units are cheaper to buy and install - $2,500-$5,500 - but cost more to run in most markets. They're common in the Southeast, in apartments, and as backup heat for heat pumps.
Mobile and manufactured homes
Mobile home furnaces are a different animal: downflow configuration, tighter cabinets, and specific venting requirements. Replacement runs $2,800-$5,200. Our mobile home furnace repair techs know these units inside out.
Wall heaters and specialty units
Single-room wall heaters are far cheaper to replace - $800-$2,500 - and often repaired rather than swapped. If you're dealing with a failing wall unit, wall heater repair is usually the first stop.
Repair or Replace? The 50% Rule and the Age Rule
Two rules of thumb settle most of these decisions. First, the 50% rule: if the repair quote exceeds half the cost of a new furnace, replacement usually wins. Second, the age rule: a furnace past 15 years old, or past 20 for an older 80% unit, is on borrowed time.
There are also hard signals that a repair isn't the answer:
- A cracked heat exchanger - a carbon monoxide risk, and not worth repairing on an old unit
- Repeated blower motor failures, especially on a unit over 12 years old
- Rising gas bills with no change in usage, which points to declining efficiency
- Yellow or flickering burner flames instead of steady blue
If you're seeing any of those, don't wait for the next cold snap. Our emergency furnace repair line runs through the winter, and we'll tell you straight whether you're looking at a fix or a replacement.
Common Mistakes Homeowners Make When Replacing a Furnace
The most expensive furnace mistakes happen before the truck ever pulls into the driveway. Here's what we see repeatedly.
- Buying on price alone. The cheapest quote usually skips the load calculation, reuses the old flue, or installs an undersized unit. You'll pay for it in comfort and repairs.
- Skipping the Manual J load calculation. A properly sized furnace is calculated from your home's square footage, insulation, window area, and climate zone. Guessing by square footage alone leads to short-cycling or a system that never keeps up.
- Ignoring the warranty terms. Manufacturer warranties often require registration within 60 days and annual maintenance. Skip the tune-up and a 10-year parts warranty can be voided.
- Not asking about the old unit's disposal. Haul-away should be included. If it isn't, you're paying $100-$250 to get rid of it yourself.
- Replacing the furnace but not the AC. If your air conditioner is the same age, replacing both at once saves $500-$1,500 in shared labor.
One more: don't skip the post-install commissioning. A good tech checks static pressure, temperature rise, and gas pressure before leaving. If those numbers aren't verified, the install isn't finished.
When to Call a Professional
Furnace work is not a DIY category. Gas connections, flue venting, and heat exchangers are code-regulated for a reason - a bad install can leak carbon monoxide into your home. If you smell gas, hear a rumbling or booming sound at startup, or see soot around the burner compartment, shut the system down and call a licensed technician.
We're Furnace Rescue Pros, and we handle Furnace Repair across the United States - diagnostics, repairs, and full replacements. Our technicians carry combustion analyzers and test every unit before we call the job done. If a repair will get you through the season, we'll say so. If it won't, we'll walk you through replacement options without pressure.
Frequently Asked Questions
How long does a furnace replacement take?
A standard gas furnace swap takes 4 to 8 hours with a two-person crew. Jobs that involve new venting, ductwork modifications, or gas line upgrades can stretch to a full day or two. You'll have heat back the same day in most cases.
Is it worth replacing a 20-year-old furnace?
Yes, in most cases. A 20-year-old furnace is past its expected lifespan of 15 to 20 years, and efficiency has improved significantly. A new 96% AFUE unit can cut heating costs by 20-30% compared to an aging 80% system, which offsets part of the upfront cost.
Can I replace just the furnace and keep my AC?
Yes. The furnace and air conditioner are separate components, though they share the blower and ductwork. If your AC is under 10 years old and working well, replacing only the furnace is fine. If it's the same age as the old furnace, replacing both at once saves on labor.
Does homeowners insurance cover furnace replacement?
Standard policies cover sudden damage - a fire, a burst pipe that ruins the unit - but not normal wear and tear or mechanical failure from age. If your furnace died of old age, expect to pay out of pocket. Some home warranty plans cover partial replacement.
What size furnace do I need?
Size is measured in BTUs and calculated from your home's square footage, insulation, window area, ceiling height, and local climate. A 1,500-square-foot home in a cold climate might need 60,000-80,000 BTUs; the same home in a mild climate might need 40,000. A Manual J load calculation is the only accurate way to size it.
Get Help With Furnace Repair in the United States
Whether you need a diagnostic visit, a repair, or a full replacement quote, we'll give you a straight answer and upfront pricing before any work starts. Call Furnace Rescue Pros at (855) 797-0010 and we'll get your heat back on.
Frequently asked questions
How long does a furnace replacement take?
A standard gas furnace swap takes 4 to 8 hours with a two-person crew. Jobs involving new venting, ductwork changes, or gas line upgrades can take a full day or two. Most homeowners have heat back the same day.
Is it worth replacing a 20-year-old furnace?
Yes, in most cases. A 20-year-old furnace is past its 15-to-20-year lifespan, and a new 96% AFUE unit can cut heating costs by 20-30% versus an aging 80% system, which offsets part of the upfront cost.
Can I replace just the furnace and keep my AC?
Yes. The furnace and air conditioner are separate components that share the blower and ductwork. If your AC is under 10 years old and working well, replacing only the furnace is fine. If both are the same age, replacing together saves $500-$1,500 in shared labor.
Does homeowners insurance cover furnace replacement?
Standard policies cover sudden damage like fire or a burst pipe, but not wear and tear or age-related mechanical failure. If your furnace died of old age, expect to pay out of pocket. Some home warranty plans cover partial replacement.
What size furnace do I need?
Size is measured in BTUs and calculated from square footage, insulation, window area, ceiling height, and climate. A 1,500-square-foot home in a cold climate might need 60,000-80,000 BTUs; in a mild climate, 40,000. A Manual J load calculation is the accurate method.